Wurth Electronics' Wireless M-Bus module supports operating mode "N" to meet the requirements of one-way and two-way data communication in stationary and mobile systems. M-Bus standard specifies the communication between water, gas, heat, and electricity meters and concentrators. 

The AMB3626-M is an all embedded low-cost wireless M-Bus radio module, which operates in 169 MHz frequency band. The integrated protocol controls the entire data communication. Data packets are built and transmitted according to EN13757 part 4 specifications. Configuration of parameters is handled via the UART interface and a control pin. Measured field strength or RSSI value offers the option of enhancing the quality of the radio link.

The customized application layer can be fully integrated into the radio module, thus eliminating the need for an external host microcontroller. The radio module supports the AES-128 encryption standard. A very low-power mode ensures long battery lifetime.

The module is pre-certified for operation under the European radio regulations for license-free use. Due to its outstanding RF characteristics, the module achieves a range of up to 5,000 meters line-of-sight.

Interfaces

The AM3626-M is connected to a host system via the UART / SPI interface with a data rate of up to 115.2 kbps. When using appropriate firmware, the module is also suitable for autonomously recording digital or analog signals. Other pins can be used for data flow control and to switch between operating modes.

Range of Applications

The radio module is designed for automatic meter reading applications for wireless data transmission according to the Wireless M-Bus specification. The radio module is designed to be integrated with meters, data concentrators and mobile metering devices. Other applications are conceivable. Its compact dimensions and low-power consumption make the radio module ideal for battery-powered devices.