PanelMate™ AT/ATP Series™ Connectors

By Amphenol Sine Systems Corp 103

PanelMate™ AT/ATP Series™ Connectors

Amphenol Sine Systems' PanelMate series combines flange mounting options with the proven reliability of the AT/ATP Series™ environmentally-sealed thermoplastic connection system. Engineered with a one-piece sealed flange design for rapid and secure mounting, its durable high-temperature silicone facial seal provides a barrier of protection from lubricating oils, hydraulic fluids, and fossil fuels to withstand the challenges and complexities of harsh environment applications. PanelMate AT/ATP Series meet all the performance criteria and specifications of the AT Series and is also available in a wide variety of custom colors.

Downloads

  • PanelMate™ AT Catalog
  • PanelMate™ ATP Catalog
  • PanelMate™ AT/ATP Flyer
Specifications
  • Wire range:
    • Size 12 contacts will accept wire ranges of 12 AWG to 14 AWG
    • Size 16 contacts will accept 14 AWG to 20 AWG
  • Operating temperature range: -55°C to +125°C at rated current
  • Housing/latch: thermoplastic/integrated latch for mating
  • Dielectric value: meets or exceeds 1500 V minimum
  • Drop test: shall not become detached or loosened when placed at 750 mm and dropped to concrete eight times
  • Shock: no latch disengagement or discontinuity shall be the result when subjected to 50 Gs in each of three axes (X, Y, and Z)
  • Vibration: continued continuity without degradation to mechanical or physical attributes following vibration (max acceleration 20 Gs at Sine sweep of 10 Hz to 2000 Hz)
  • Connector terminal retention: when subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.
  • Connector retention: a mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds
  • Thermal shock: subjected to 10 cycles at -55°C to +125°C with no cracking, chipping, or other damage detrimental to the normal operation of the connector
  • Insulation resistance: 1000 MΩ minimum at 25°C
  • Mating cycle durability: following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident
  • Contact millivolt drop: size 16 contacts with 16 AWG conductor - 100 mV drop max at 13 A test current
  • Water immersion: a mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter without loss of electronic performance

カテゴリ

Top