Minitek® Pwr 3.0 Connector System

By Amphenol ICC 185

Minitek® Pwr 3.0 Connector System

Amphenol ICC's Minitek Pwr 3.0 is a flexible and comprehensive solution designed for power applications with current rating up to 5 A per circuit. It is available in two to 24 circuits for dual row and two to 12 circuits for single row products. Crimp, snap-in header, and receptacle contacts are used to terminate 30 AWG to 20 AWG wires. Header and receptacle housings allow wire-to-wire and wire-to-board configurations. Crimping and removal tools are available for wire harness assembly. Header assemblies for wire-to-board interconnections include vertical and right-angle components. These wave solder headers are also available in through-hole configurations.


  • Minitek® Pwr 3.0 Datasheet
  • Minitek® Pwr 3.0 Product Presentation
  • Minitek® Pwr 3.0 Product Specification
  • Minitek® Pwr 3.0 Application Specification
  • Low insertion force for installation of crimped terminal
  • Fully isolated terminals
  • Positive locking on housing with low thumb latch operation
  • Fully polarized housings
  • Scoop-proof housings
  • High retention force in housing
  • Glow wire compliant option
  • BMI option
  • UL94V-0 flammability rated LCP material
  • RoHS compliant and lead-free
  • Easy to use
  • Prevents terminals from potential damage during operation
  • Ensures secure mating retention
  • Prevents accidental mismating
  • Ensures terminals and header pins are not damaged for angled mating
  • Well secured terminals in the housing
  • Complies with International Standard IEC 60335-1 for household appliances
  • Allows ±2.54 mm gatherability for blind mating
  • High flammability rating
  • Meets health and safety requirements
  • Meets environmental, health, and safety requirements