Minitek® Pwr 4.2 Connector System

By Amphenol ICC 156

Minitek® Pwr 4.2 Connector System

Amphenol ICC's Minitek Pwr 4.2 mm is a flexible and comprehensive solution designed for power applications with current rating up to 9 A per circuit. They are available in dual row and two to 24 circuits. Crimp, snap-in header, and receptacle contacts are used to terminate 38 AWG to 16 AWG wires. Header and receptacle housings allow wire-to-wire and wire-to-board configurations. Crimping and removal tools are available for wire harness assembly. Header assemblies for wire-to-board interconnections include vertical and right-angle components. These wave solder headers are available in through hole configurations.


  • Minitek® Pwr 4.2 Datasheet
  • Minitek® Pwr 4.2 Product Presentation
  • Minitek® Pwr 4.2 Product Specification
  • Minitek® Pwr 4.2 Application Specification
  • Low insertion force for installation of crimped terminal
  • Fully isolated terminals
  • Positive locking on housing with low thumb latch operation
  • Fully polarized housings
  • Scoop-proof housings
  • High retention force in housing
  • Glow wire compliant option
  • BMI option
  • UL94V-0 flammability rated LCP material
  • Patented right angle type receptacle
  • RoHS compliant and lead-free
  • Easy to use
  • Prevents terminals from potential damage during operation
  • Ensures secured mating retention
  • Prevents accidental mismating
  • Ensures terminals and header pins are not damaged for angled mating
  • Well secured terminals in the housing
  • Complies with International Standard IEC 60335-1 for household appliances
  • Allows ± 2.54 mm gatherability for blind mating
  • High flammability rating
  • Ideal for cable routing within 1U or 2U equipment systems
  • Meets environmental, health, and safety requirements