M74HCT573B1R

M74HCT573B1R
Mfr. #:
M74HCT573B1R
メーカー:
STMicroelectronics
説明:
Latches Octal "D" Latch
ライフサイクル:
メーカー新製品
データシート:
M74HCT573B1R データシート
配達:
DHL FedEx Ups TNT EMS
支払い:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
詳しくは:
M74HCT573B1R 詳しくは M74HCT573B1R Product Details
製品属性
属性値
メーカー:
STMicroelectronics
製品カテゴリ:
ラッチ
JBoss:
Y
回路数:
8 Circuit
ロジックタイプ:
Dタイプラッチ
ロジックファミリ:
74HC
極性:
非反転
静止電流:
4 uA
出力ラインの数:
3 Line
高レベル出力電流:
- 6 mA
低レベル出力電流:
32 mA
伝播遅延時間:
36 ns at 4.5 V
供給電圧-最大:
5.5 V
供給電圧-最小:
4.5 V
最低動作温度:
- 55 C
最高作動温度:
+ 125 C
パッケージ/ケース:
DIP-20
包装:
チューブ
関数:
ラッチ
高さ:
2.68 mm
長さ:
25.4 mm
出力タイプ:
3-State
シリーズ:
M74HCT573
タイプ:
Dタイプ
幅:
7.1 mm
ブランド:
STMicroelectronics
取り付けスタイル:
スルーホール
チャネル数:
8 Channels
入力行数:
8 Line
供給電流-最大:
4 uA
動作供給電圧:
4.5 V to 5.5 V
製品タイプ:
ラッチ
リセットタイプ:
リセットなし
ファクトリーパックの数量:
1
サブカテゴリ:
ロジックIC
単位重量:
0.088502 oz
Tags
M74HCT573, M74HCT57, M74HCT5, M74HCT, M74HC, M74H, M74
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***ow.cn
Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube
***el Electronic
74HCT CMOS, 74HCT573, DIP20, 5.5V - More Details
***S
French Electronic Distributor since 1988
***nell
74HCT CMOS, 74HCT573, DIP20, 5.5V; Logic Family / Base Number: 74HCT573; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 25ns; Output Current: 6mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74573; Operating Temperature Min: -55°C; Operating Temperature Max: 125°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: To Be Advised; MSL: -; SVHC: No SVHC (17-Dec-2015); Base Number: 74; IC Generic Number: 74HCT573; Logic Function Number: 573; Logic IC Base Number: 74573; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -55°C to +125°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole
***el Electronic
FAIRCHILD SEMICONDUCTOR MM74HCT373N Latch, D Type, Tri State, 30 ns, 7.2 mA, DIP, 20 Pins
***Yang
Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP W Rail - Rail/Tube
***nell
74HCT CMOS, 74HCT373, DIP20, 5.5V; Logic Family / Base Number: 74HCT373; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 30ns; Output Current: 7.2mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74373; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; SVHC: No SVHC (15-Jan-2018); Base Number: 74; IC Generic Number: 74HCT373; Logic Function Number: 373; Logic IC Base Number: 74373; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -40°C to +85°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole
***rchild Semiconductor
The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic & pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT373 LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT374 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
***Yang
Latch Transparent 3-ST 8-CH D-Type 20-Pin PDIP W Rail - Rail/Tube
***nell
74HCT CMOS, 74HCT573, DIP20, 5.5V; Logic Family / Base Number: 74HCT573; Latch Type: D Type; IC Output Type: Tri State; Propagation Delay: 18ns; Output Current: 7.2mA; Logic Case Style: DIP; No. of Pins: 20Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; No. of Bits: 8bit; Logic IC Family: 74HCT; Logic IC Base Number: 74573; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; SVHC: No SVHC (15-Jan-2018); Base Number: 74; Device Marking: 74HCT573; Logic Function Number: 573; Logic IC Base Number: 74573; Logic IC Function: Octal D-Type Transparent Latch (3-State); No. of Inputs: 1; Operating Temperature Range: -40°C to +85°C; Supply Voltage Range: 4.5V to 5.5V; Termination Type: Through Hole
***rchild Semiconductor
The MM74HCT573 octal D-type latches and MM74HCT574 octal D-type flip-flop advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic and pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT573 Latch Enable input is HIGH, the Q outputs will follow the D inputs. When the Latch Enable goes LOW, data at the D inputs will be retained at the outputs until Latch Enable returns HIGH again. When a high logic level is applied to the Output Control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT574 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the Clock (CK) input. When a high logic level is applied to the Output Control (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
***et
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP W Rail
***el Electronic
FAIRCHILD SEMICONDUCTOR MM74HCT374NFlip-Flop, D, 30 ns, 50 MHz, 7.2 mA, DIP, 20 Pins
***rchild Semiconductor
The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicon-gate CMOS technology, which provides the inherent benefits of low power consumption and wide power supply range, but are LS-TTL input and output characteristic & pin-out compatible. The 3-STATE outputs are capable of driving 15 LS-TTL loads. All inputs are protected from damage due to static discharge by internal diodes to VCC and ground. When the MM74HCT373 LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The MM74HCT374 are positive edge triggered flip-flops. Data at the D inputs, meeting the setup and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
***roFlash
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube
***as Instruments
High Speed CMOS Logic Octal Positive-Edge-Triggered D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125
***ponent Stockers USA
HCT SERIES 8-BIT DRIVER TRUE OUTPUT PDIP20
***or
BUS DRIVER, HCT SERIES, 1-FUNC,
*** Stop Electro
D Flip-Flop, HCT Series, 1-Func, Positive Edge Triggered, 8-Bit, True Output, CMOS, PDIP20
***as Instruments
High Speed CMOS Logic Octal D-Type Flip-Flop with eset 20-PDIP -55 to 125
***ical
Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin PDIP Tube
***nell
74HCT CMOS, 74HCT273, DIP20, 5.5V; Famille Logique/ Numéro de base: 74HCT273; Type de Flip-Flop: D; Temps de propagation: 12ns; Fréquence: 50MHz; Courant, sortie: 4mA; Type de boîtier CI logique: DIP; Nombre de broches: 20Broch
***ark
74Hct Cmos, 74Hct273, Dip20, 5.5V; Logic Family / Base Number:74Hct273; Flip-Flop Type:d; Propagation Delay:12Ns; Frequency:50Mhz; Output Current:4Ma; Logic Case Style:dip; No. Of Pins:20Pins; Trigger Type:positive Edge; Ic Output Rohs Compliant: Yes
***Yang
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube
***ark
Flip-Flop Logic IC; Logic Family:F; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Package/Case:20-PDIP; No. of Pins:20; Operating Temperature Range:0°C to +70°C; Input Type:TTL; Leaded Process Compatible:Yes; Output Type:TTL ;RoHS Compliant: Yes
***ment14 APAC
LOGIC, OCT EDG-TRG D-TYP F-F, 20DIP; Flip-Flop Type:D; Propagation Delay:6.1ns; Frequency:100MHz; Output Current:24mA; Trigger Type:Positive Edge; IC Output Type:Tri State Non Inverted; Supply Voltage Range:4.5V to 5.5V; Logic Case Style:DIP; No. of Pins:20; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Logic IC Base Number:74574; Logic IC Family:F; Logic IC Function:Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs; Output Type:Tri State Non Inverted; Package / Case:PDIP; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:Through Hole
***as Instruments
This 8-bit flip-flop features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the SN74F574 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs will be set to the logic levels that were set up at the data (D) inputs. A buffered output enable input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. The output enable does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74F574 is characterized for operation from 0°C to 70°C.
モデル メーカー 説明 ストック 価格
M74HCT573B1R
DISTI # V79:2366_17792527
STMicroelectronicsLatch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube
RoHS: Compliant
460
  • 100:$0.4542
  • 25:$0.5169
  • 10:$0.6894
  • 1:$0.8213
M74HCT573B1R
DISTI # 497-1917-5-ND
STMicroelectronicsIC LATCH OCTAL D-TYPE 20-DIP
RoHS: Compliant
Min Qty: 2000
Container: Tube
Limited Supply - Call
    M74HCT573B1R
    DISTI # 26117877
    STMicroelectronicsLatch Transparent 3-ST 8-CH D-Type 20-Pin PDIP Tube
    RoHS: Compliant
    460
    • 29:$0.8213
    M74HCT573B1R
    DISTI # 511-M74HCT573
    STMicroelectronicsLatches Octal "D" Latch
    RoHS: Compliant
    0
      M74HCT573B1R
      DISTI # 1094314
      STMicroelectronics74HCT CMOS, 74HCT573, DIP20, 5.5V
      RoHS: Compliant
      0
      • 500:$0.3870
      • 250:$0.4050
      • 100:$0.4730
      • 25:$0.6080
      • 10:$1.0600
      • 1:$1.4200
      画像 モデル 説明
      M74HCT74TTR

      Mfr.#: M74HCT74TTR

      OMO.#: OMO-M74HCT74TTR-STMICROELECTRONICS

      IC FF D-TYPE DUAL 1BIT 14TSSOP
      M74HCT00P

      Mfr.#: M74HCT00P

      OMO.#: OMO-M74HCT00P-1190

      ブランドニューオリジナル
      M74HCT02RM13

      Mfr.#: M74HCT02RM13

      OMO.#: OMO-M74HCT02RM13-1190

      ブランドニューオリジナル
      M74HCT132MTR

      Mfr.#: M74HCT132MTR

      OMO.#: OMO-M74HCT132MTR-1190

      ブランドニューオリジナル
      M74HCT652M1R

      Mfr.#: M74HCT652M1R

      OMO.#: OMO-M74HCT652M1R-1190

      ブランドニューオリジナル
      M74HCT688M1R

      Mfr.#: M74HCT688M1R

      OMO.#: OMO-M74HCT688M1R-1190

      ブランドニューオリジナル
      M74HCT688RM13TR SOP7.2

      Mfr.#: M74HCT688RM13TR SOP7.2

      OMO.#: OMO-M74HCT688RM13TR-SOP7-2-1190

      ブランドニューオリジナル
      M74HCT273B1R

      Mfr.#: M74HCT273B1R

      OMO.#: OMO-M74HCT273B1R-STMICROELECTRONICS

      IC FF D-TYPE SNGL 8BIT 20DIP
      M74HCT374RM13TR

      Mfr.#: M74HCT374RM13TR

      OMO.#: OMO-M74HCT374RM13TR-STMICROELECTRONICS

      IC FF D-TYPE SNGL 8BIT 20SOP
      M74HCT367RM13TR

      Mfr.#: M74HCT367RM13TR

      OMO.#: OMO-M74HCT367RM13TR-STMICROELECTRONICS

      Buffers & Line Drivers Hex Bus Buffe
      可用性
      ストック:
      Available
      注文中:
      3000
      数量を入力してください:
      M74HCT573B1Rの現在の価格は参考用です。最高の価格をご希望の場合は、お問い合わせまたは直接メールで営業チーム[email protected]までご連絡ください。
      皮切りに
      最新の製品
      • L6470 dSPIN Motor Driver
        STMicro's L6470 dSPIN motor driver has the ability to allow a single MCU to control more than one device and reduces resonance, noise, and vibration.
      • Solar Battery Charger
        STMicroelectronics' solar battery charger consists of a DC-DC step up converter transferring energy from a solar panel to a load by using embedded MPPT algorithm.
      • SPC58 Chorus G Line General Purpose Automotive MCU
        STMicro's SPC58 Chorus G line consists of general-purpose 32-bit Power Architecture® microcontrollers targeting body, networking, and security applications.
      • Compare M74HCT573B1R
        M74HCT573B1 vs M74HCT573B1R vs M74HCT573M1R
      • PowerFLAT™ 8x8 HV
        STMicroelectronics' PowerFLAT HV SMDs are low profile and highly efficient, allowing engineers to design denser and more efficient conversion stages.
      • 600 V Ultrafast Diodes in High Voltage D²PAK
        STMicro's offers rectifiers, STBR, SiC diode, and STTH series housed inside the D²PAK High Voltage helps to solve the standard related to creepage distance.
      Top