TLK4015

Mfr. #:: TLK4015
メーカー:: Texas Instruments
説明:
ライフサイクル:: メーカー新製品
データシート:: TLK4015 データシート
配達:: DHL FedEx Ups TNT EMS
支払い:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

製品属性
属性値

メーカー: テキサスインスツルメンツ

製品カテゴリ: インターフェース-ドライバー、レシーバー、トランシーバー

シリーズ: TLK4015

製品: イーサネットトランシーバー

タイプ: トランシーバー

包装: トレイ

単位重量: 0.048396 oz

取り付けスタイル: SMD / SMT

パッケージ-ケース: BGA-289

作動温度: -40°C ~ 85°C

取付タイプ: 表面実装

電圧供給: 2.375 V ~ 2.625 V

サプライヤー-デバイス-パッケージ: 289-BGA (19x19)

プロトコル: ギガビットイーサネット

データレート: 1.5 Gb/s

ドライバー-レシーバーの数: 2016/4/4

デュプレックス: 満杯

レシーバー-ヒステリシス: -

最高作動温度: + 85 C

最低作動温度: - 40 C

供給-電流-最大: 580 mA

Tags: TLK401, TLK40, TLK4, TLK

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TLK4015 説明

***th Star Micro: the tlk4015 is a four-channel multigigabit transceiver used in ultrahigh-speed bidirectional point-to-point data transmission systems. the four channels in the tlk4015 are configured as four separate links. the tlk4015 supports an effective serial interface speed of 0.6 gbps to 1.5 gbps per channel providing up to 1.2 gbps of data bandwidth per channel. the primary application of this chip is to provide very high-speed i/o data channels for point-to-point baseband data transmission over controlled-impedance media of approximately 50 . the transmission media can be printed-circuit board copper cables or fiber-optic cable. the maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling from the environment. view all in datasheet

***as Instruments: The TLK4015 is a four-channel multigigabit transceiver used in ultrahigh-speed bidirectional point-to-point data transmission systems. The four channels in the TLK4015 are configured as four separate links. The TLK4015 supports an effective serial interface speed of 0.6 Gbps to 1.5 Gbps per channel, providing up to 1.2 Gbps of data bandwidth per channel. The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled-impedance media of approximately 50 . The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling from the environment. This device can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector terminals, and transmit/receive terminals. Parallel data loaded into the transmitter is delivered to the receiver over a serial channel. It is then reconstructed into its original parallel format. It offers significant power and cost savings over current solutions, as well as scalability for higher data rates in the future. The TLK4015 performs parallel-to-serial and serial-to-parallel data conversion. The clock extraction functions as a physical layer interface device. The serial transceiver interface operates at a maximum speed of 1.5 Gbps. Each transmitter latches 16-bit parallel data at a rate based on the supplied reference clock (GTx_CLK). The 16-bit parallel data is internally encoded into 20 bits using an 8-bit/10-bit (8b/10b) encoding format. The resulting 20-bit word is then transmitted differentially at 20 times the reference clock (GTx_CLK) rate. The receiver section performs the serial-to-parallel conversion on the input data, synchronizing the resulting 20-bit wide parallel data to the extracted reference clock (Rx_CLK). It then decodes the 20-bit-wide data using 8-bit/10-bit decoding format, resulting in 16 bits of parallel data at the receive data terminals RDx[015]). The outcome is an effective data payload of 480 Mbps to 1.2 Gbps (16 bits data the GTx_CLK frequency) per channel. The TLK4015 provides an internal loopback capability for self-test purposes. Serial data from the serializer is passed directly to the deserializer, allowing the protocol device a functional self-check of the physical interface. The TLK4015 is designed to be hot-plug capable. An on-chip power-on reset circuit holds the Rx_CLK low during power up. This circuit also holds the parallel side output signal terminals as well as DOUTTxP and DOUTTxN in a high-impedance state during power up. The TLK4015 has a loss-of-signal detection circuit for conditions where the incoming signal no longer has sufficient voltage amplitude to keep the clock recovery circuit in lock. To prevent a data bit error from causing a valid data packet to be interpreted as a comma and thus causing erroneous word alignment by the comma detection circuit, the comma word alignment circuit is turned off after the link is properly established in TLK4015. The TLK4015 allows users to implement redundant ports by connecting receive data bus pins from two TLK4015 devices together. Asserting LCKREFNx to a low state drives the receive data bus pins, RDx[015], Rx_CLK and Rx_ER, Rx_DV/LOSx to a high-impedance state. This places the device in a transmit-only mode because the receiver is not tracking the data. The TLK4015 uses a 2.5-V supply. The I/O section is 3-V compatible. With the 2.5-V supply the device is very power-efficient, typically consuming less than 1.5 W. The TLK4015 is characterized for operation from 40C to 85C.

Market price

モデル	メーカー	説明	ストック	価格
TLK4015IGPV DISTI # 296-14198-5-ND	Texas Instruments	IC TXRX QUAD 1.5GBPS 4CH 289-BGA RoHS: Compliant Min Qty: 84 Container: Tray	Limited Supply - Call
TLK4015IZPV DISTI # 296-21254-ND	Texas Instruments	IC TXRX QUAD 0.6-1.5GBPS 289-BGA RoHS: Compliant Min Qty: 84 Container: Tray	Limited Supply - Call
TLK4015IZPV DISTI # 595-TLK4015IZPV	Texas Instruments	Ethernet ICs 4 Ch 0.6-1.5 Gbps RoHS: Compliant	0
TLK4015IGPV DISTI # 595-TLK4015IGPV	Texas Instruments	Ethernet ICs 4 Ch 0.6 to 1.5 Gbps Ch Transceiver RoHS: Not compliant	0
TLK4015IGPV	Texas Instruments	Telecom Circuit, 1-Func, PBGA289 RoHS: Not Compliant	12903	1000:$39.1700 500:$41.2300 100:$42.9300 25:$44.7700 1:$48.2100
TLK4015IZPV	Texas Instruments	Telecom Circuit, 1-Func, PBGA289 RoHS: Compliant	21378	1000:$39.1700 500:$41.2300 100:$42.9300 25:$44.7700 1:$48.2100
TLK4015IZPV DISTI # 1576967	Texas Instruments	TRANCEIVER, ENET, 0.6-1.5GBPS, 289BGA RoHS: Compliant	0	1000:$60.1900 500:$63.4100 100:$69.6300 10:$72.4700 1:$73.9800

画像	モデル	説明
	Mfr.#: TLK6201EARGTT OMO.#: OMO-TLK6201EARGTT	Equalizers 1-6.25Gbps Cable and PC Board Equalizer
	Mfr.#: TLK4250IZPV OMO.#: OMO-TLK4250IZPV	Serializers & Deserializers - Serdes 4Ch 18B Xceiver 1-2.5 Gbps/Ch
	Mfr.#: TLK2208AZPV OMO.#: OMO-TLK2208AZPV	Ethernet ICs Octal Gig Ether Tran
	Mfr.#: TLK1101E OMO.#: OMO-TLK1101E-1190	ブランドニューオリジナル
	Mfr.#: TLK1201RCPG4 OMO.#: OMO-TLK1201RCPG4-1190	Ethernet ICs Gigabit Ethernet Xceive
	Mfr.#: TLK1521IPAPG4 OMO.#: OMO-TLK1521IPAPG4-TEXAS-INSTRUMENTS	IC TXRX 1.3GBPS 18BIT 64-HTQFP
	Mfr.#: TLK211AARCP OMO.#: OMO-TLK211AARCP-1190	ブランドニューオリジナル
	Mfr.#: TLK2521PAP OMO.#: OMO-TLK2521PAP-1190	ブランドニューオリジナル
	Mfr.#: TLK2541 OMO.#: OMO-TLK2541-1190	ブランドニューオリジナル
	Mfr.#: TLK3104SC OMO.#: OMO-TLK3104SC-1190	ブランドニューオリジナル

TLK4015

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes