ADUCM310BBCZ-RL

Mfr. #:: ADUCM310BBCZ-RL
メーカー:: Analog Devices Inc.
説明:: ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
ライフサイクル:: メーカー新製品
データシート:: ADUCM310BBCZ-RL データシート
配達:: DHL FedEx Ups TNT EMS
支払い:: T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:: ADUCM310BBCZ-RL Datasheet ADUCM310BBCZ-RL Datasheet (P4-P6)ADUCM310BBCZ-RL Datasheet (P7-P9)ADUCM310BBCZ-RL Datasheet (P10-P12)ADUCM310BBCZ-RL Datasheet (P13-P15)ADUCM310BBCZ-RL Datasheet (P16-P18)ADUCM310BBCZ-RL Datasheet (P19-P21)ADUCM310BBCZ-RL Datasheet (P22-P24)ADUCM310BBCZ-RL Datasheet (P25-P27)ADUCM310BBCZ-RL Datasheet (P28)
ECAD Model:
詳しくは:: ADUCM310BBCZ-RL 詳しくは ADUCM310BBCZ-RL Product Details

製品属性
属性値

メーカー：: アナログ・デバイセズ

製品カテゴリ：: ARMマイクロコントローラー-MCU

JBoss：: Y

取り付けスタイル：: SMD / SMT

パッケージ/ケース：: BGA-112

シリーズ：: ADUCM310

芯：: ARM Cortex M3

データバス幅：: 32 bit

最大クロック周波数：: 80 MHz

プログラムメモリサイズ：: 256 kB

データRAMサイズ：: 32 kB

ADC分解能：: 14 bit

動作供給電圧：: 3.3 V

最低動作温度：: - 10 C

最高作動温度：: + 85 C

包装：: リール

製品：: MCU

プログラムメモリタイプ：: 閃光

ブランド：: アナログ・デバイセズ

データRAMタイプ：: SRAM

インターフェイスタイプ：: I2C, SPI, UART

アナログ供給電圧：: 3.6 V

DAC解像度：: 12 bit

I / O電圧：: 3.3 V

ADCチャネルの数：: 22 Channel

タイマー/カウンターの数：: 3 Timer

プロセッサシリーズ：: ADUCM310

製品タイプ：: ARMマイクロコントローラー-MCU

ファクトリーパックの数量：: 2500

サブカテゴリ：: マイクロコントローラー-MCU

供給電圧-最大：: 3.6 V

供給電圧-最小：: 2.9 V

ウォッチドッグタイマー：: ウォッチドッグタイマー

Tags: ADUCM31, ADUCM3, ADUCM, ADUC, ADU

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

ADUCM310BBCZ-RL 説明

***et Europe: MCU 32-Bit ADuCM31x ARM Cortex M3 RISC 256KB Flash 2.5V/3.3V 112-Pin CSP-BGA T/R

***i-Key: IC MCU 32B 256KB FLASH 112CSPBGA

***ark: 80Mhz M3 wi 14Bit Analog Ror TSRP+ (Rin), REEL

***log Devices: The ADuCM310 is a multidie stack, on-chip system designed for diagnostic control of tunable laser optical module applications. The ADuCM310 features a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) ADC, an ARM Cortex™-M3 processor, eight voltage DACs (VDACs), six current output DACs, and Flash/EE memory packaged in a 6 mm × 6 mm, 112-ball CSP_BGA package. The bottom die in the stack supports the bulk of the low voltage analog circuitry and is the largest of the three die. It contains the ADC, VDACs, main IDAC circuits, as well as other analog support circuits, such as the low drift precision 2.5 V voltage reference source. The middle die in the stack supports the bulk of the digital circuitry, including the ARM Cortex-M3 processor, the flash and SRAM blocks, and all of the digital communication peripherals. In addition, this die provides the clock sources for the whole chip. A 16 MHz internal oscillator is the source of the internal PLL that outputs an 80 MHz system clock. The top die, which is the smallest die, was developed on a high voltage process, and this die supports the −5 V and +5 V VDAC outputs. It also implements the SOA IDAC current sink circuit that allows the external SOA diode to pull to a −3.0 V level to implement the fast shutdown of the laser output. Regarding the individual blocks, the ADC is capable of operating at conversion rates up to 800 kSPS. There are 10 external inputs to the ADC, which can be single ended or differential. Several internal channels are included, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs are 12-bit string DACs with output buffers capable of sourcing between 10 mA and 50 mA, and these DACs are all capable of driving 10 nF capacitive loads. The low drift current DACs have 14-bit resolution and varied full-scale output ranges from 0 mA to 20 mA to 0 mA to 250 mA on the SOA IDAC (IDAC3). The SOA IDAC also comes with a 0 mA to −80 mA current sink capability. A precision 2.5 V on-chip reference source is available. The internal ADC, IDACs, and VDAC circuits use this on-chip reference source to ensure low drift performance for all of these peripherals. The ADuCM310 also provides 2× buffered reference outputs capable of sourcing up to 1.2 mA. These outputs can be used externally to the chip. The ADuCM310 integrates an 80 MHz ARM Cortex-M3 processor. It is a 32-bit reduced instruction set computer (RISC) machine, offering up to 100 DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I2C communication peripherals. The ADuCM310 has 256 kB of nonvolatile Flash/EE memory and 32 kB of SRAM integrated on-chip. A 16 MHz on-chip oscillator generates the 80 MHz system clock. This clock internally divides to allow the processor to operate at lower frequency, thus saving power. A low power internal 32 kHz oscillator is available and can clock the timers. The ADuCM310 includes three general-purpose timers, a wake-up timer (which can be used as a general-purpose timer), and a system watchdog timer. A range of communication peripherals can be configured as required in a specific application. These peripherals include UART, 2 × I2C, 2 × SPI, GPIO ports, and pulse-width modulation (PWM). On-chip factory firmware supports in-circuit serial download via the UART, while nonintrusive emulation and program download are supported via the serial wire debug port (SW-DP) interface. These features are supported on the EVAL-ADuCM310QSPZ development system. The ADuCM310 operates from 2.9 V to 3.6 V and is specified over a temperature range of −40°C to +85°C. Note that, throughout this data sheet, multifunction pins, such as P1.0/SIN/ECLKIN/PLAI[4], are referred to either by the entire pin name or by a single function of the pin, for example, P1.0, when only that function is relevant. For additional information on the ADuCM310, see the ADuCM310 reference manual, How to Set Up and Use the ADuCM310. APPLICATIONS Optical modules—tunable laser modules

ADUCM310BBCZ-RL 詳しくは

Microcontrollers: Analog Devices Microcontroller Units (MCUs) can be used in a multitude of Internet of Things (IoT) processing applications. With built-in ADCs, DACs, and temperature sensors, the microcontrollers provide the analog and digital sensing functions that support interpreting capabilities in precision-sensing applications. Some of these MCUs can be powered by a single coin-cell battery with on-board power management, along with embedded memory and security features to help protect IP. These microcontrollers can be used in industrial, automotive, and instrumentation applications, as well as IoT applications such as Smart Agriculture, Smart Building, Smart City, Smart Factory, and Smart Health.

ADuCM310 Precision Analog MCUs: Analog Devices ADuCM310 Precision Analog Microcontrollers feature a 16-bit (14-bit accurate) multichannel successive approximation register (SAR) analog-to-digital converter (ADC), an ARM Cortex™-M3 processor, 8 voltage digital-to-analog converters (DACs), 6 current output DACs, and Flash/EE memory enclosed in a 6mm × 6mm, 112-ball CSP_BGA package. The ADC can operate at conversion rates up to 800kSPS. The device includes several internal channels, such as the supply monitor channels, an on-chip temperature sensor, and internal voltage reference monitors. The VDACs, which are 12-bit string DACs with output buffers capable of sourcing between 10mA and 50mA, are all capable of driving 10nF capacitive loads. The ADC, IDACs, and VDAC circuits use a precision 2.5V on-chip reference source to ensure low drift performance for all of the peripherals. The integrated 80MHz ARM Cortex-M3 processor has a 32-bit reduced instruction set computer (RISC) machine, providing up to 100DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller supporting serial peripheral interface (SPI), UART, and I²C communication peripherals. In addition, the ADuCM310 offers 256kB of nonvolatile Flash/EE memory and 32kB of SRAM integrated on-chip. The ADuCM310 precision analog microcontrollers are ideal for precision instrumentation, smart sensors, data acquisition systems, base station systems, transient capture systems, DAS & communications systems, wearable health monitoring devices, and optical networking.Learn More

Processors & DSP ADI SLP

Market price

モデル	メーカー	説明	ストック	価格
ADUCM310BBCZ-RL DISTI # ADUCM310BBCZ-RL-ND	Analog Devices Inc	IC MCU 32BIT 256KB FLASH 112BGA RoHS: Compliant Min Qty: 2500 Container: Tape & Reel (TR)	Temporarily Out of Stock	2500:$40.0119
ADUCM310BBCZ DISTI # 584-ADUCM310BBCZ	Analog Devices Inc	ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin) RoHS: Compliant	6	1:$52.0500 5:$50.4200 10:$49.4500 25:$47.2500 50:$44.4700 100:$43.1100
ADUCM310BBCZ-RL DISTI # 584-ADUCM310BBCZ-RL	Analog Devices Inc	ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin) RoHS: Compliant	0	2500:$39.8400
ADUCM310BBCZ-RL DISTI # ADUCM310BBCZ-RL	Analog Devices Inc	DIGITAL ISOLATOR RoHS: Compliant	0	2500:$42.5400

画像	モデル	説明
	Mfr.#: ADUCM310BBCZ OMO.#: OMO-ADUCM310BBCZ	ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
	Mfr.#: ADUCM310BBCZ-RL OMO.#: OMO-ADUCM310BBCZ-RL	ARM Microcontrollers - MCU 80Mhz M3 wi 14Bit Analog for TSFP+ (Fin)
	Mfr.#: ADUCM310BBCZ OMO.#: OMO-ADUCM310BBCZ-ANALOG-DEVICES	IC MCU 32BIT 256KB FLASH 112BGA ADuCM
	Mfr.#: ADUCM310BBCZ-RL OMO.#: OMO-ADUCM310BBCZ-RL-ANALOG-DEVICES	IC MCU 32BIT 256KB FLASH 112BGA ADuCM
	Mfr.#: ADUCM310BBCZADI OMO.#: OMO-ADUCM310BBCZADI-1190	ブランドニューオリジナル

ADUCM310BBCZ-RL

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes