Zirconia Oxygen Sensor Kits

By SST Sensing 136

Zirconia Oxygen Sensor Kits

SST Sensing’s range of zirconia oxygen sensors uses a unique closed-loop measurement system. While the sensor continuously measures the oxygen level, a heartbeat signal is also generated, providing an immediate warning of any failures. The sensing technology and stainless steel construction allow Zirconia oxygen sensors to be used in environments where extreme pressure, temperature, and high humidity are present. SST’s zirconium dioxide oxygen sensors offer a range of housing styles, cabling, and electrical connections. Their long operating life is due to the non-depleting sensor cell technology. No reference gas is required, and easy single-point calibration can be performed in any known gas including fresh air. The oxygen sensors can measure over a wide oxygen range (0.1% to 100% O₂). The reliability of these sensors means that they are used globally in applications ranging from composting to fuel tank inerting in civilian airliners.

Features and Benefits
  • Fast response zirconium dioxide (ZrO2) sensor in conjunction with the OXY-LC oxygen sensor interface board
  • Long life, non-depleting technology
  • Integral heating element
  • High accuracy
  • Linear output signal
  • No reference gas required
  • No need for temperature stabilization
  • Variety of probe mounting positions available; 28 mm, 45 mm, and 55 mm
  • M18 x 1.5 screw mounting
Specifications
  • Response time < 4 seconds
  • Permissible gas temperature -100°C to +250°C
  • Gas flow rate 0 m/s to 10 m/s
  • Operating pressure limits 260 mbar to 1260 mbar absolute
  • Digital (RS485, PWM), analog 4 mA to 20 mA or 0 V to 10V output options available
  • Supply voltage: RS485 = 8 VDC to 28 VDC; analog outputs = 20 VDC to 28 VDC

カテゴリ

Top