トレンツエレクトロニック

カテゴリ

トレンツエレクトロニック
  • Red Pitaya STEMLab Starter Kits

    Trenz Electronics' Red Pitaya STEMLab starter kits contain everything needed to start developing with the Red Pitaya STEMLab 125-10 or 125-14 boards.

    By Trenz Electronic 198

  • TE0726 Zynq "ZynqBerry" (Z-7010) Module

    Trenz Electronic's TE0726 Rasberry Pi compatible FPGA module's commercial operating temperature range depends on customer design and cooling solution.

    By Trenz Electronic 61

  • TE0722 Zynq DIPFORTy1 "Soft Propeller" M

    Trenz Electronic's DIPFORTy1 "Soft Propeller" has 16 MByte of Flash used for configuration and everything fits on a Propeller-compatible DIP 40 pinout.

    By Trenz Electronic 56

  • TE0720 Series Industrial-Grade SoC Module

    The Trenz Electronic TE0720 is a predominantly industrial-grade SoC module integrating a Xilinx Zynq Z-7020 SoC, a Gb Ethernet transceiver, 8 Gb (1 GB) DDR3 SDRAM.

    By Trenz Electronic 53

  • TE0715 Series SoC Module

    Trenz Electronic's TE0715 series with Zynq Z-7015 or Z-7030 is a standard 4 x 5 cm standard footprint SoC module designed for digital signal processing, data acquisition, test and measurement

    By Trenz Electronic 73

  • Carrier Boards

    The Trenz Electronic carrier boards are providing functionality for testing, evaluation and development purposes of 4 cm x 5 cm Trenz Electronic SoMs.

    By Trenz Electronic 117

  • TE0728 Series with Xilinx Automotive Zynq®-70

    Trenz Electronic's TE0728 module socket with Xilinx automotive Zynq®-7020 provides a number of configurable I/Os via rugged high-speed stacking strips.

    By Trenz Electronic 56

  • TE0723 ArduZynq Series with Xilinx Zynq®-Z-70

    Trenz Electronic's ArduZynq is an Arduino compatible module integrating a Xilinx Z-7000, 512 MB DDR3L, 16 MB Flash, USB OTG, on-board USB JTAG, and UART.

    By Trenz Electronic 57

  • TE0729 Series with Xilinx Zynq®-7020 SoC

    Trenz Electronic's TE0729 is an industrial-grade SoM (system on module) based on Xilinx Zynq®-7000 SoC (system on chip).

    By Trenz Electronic 57

  • TE0782 Series with Xilinx Zynq® Z-7035/Z-7045

    Trenz Electronic's TE0782 high-performance, industrial-grade SoM with industrial temp range from is based on the Xilinx Zynq®-7000 SoC (Z-7035/Z-7045/Z-7100).

    By Trenz Electronic 51

  • TE0745 Series with Xilinx Zynq® Z-7030/Z-7035

    The industrial-grade TE0745 module from Trenz combines a Xilinx Zynq® SoC (XC7Z-030, XC7Z-035 or XC7Z-045), 1 GByte DDR3/L SDRAM, and 32 MByte SPI Flash memory.

    By Trenz Electronic 52

  • icoBoard Small FPGA Board with Lattice iCE40

    Trenz's icoBoard is pin-compatible with the Raspberry Pi 2B and all versions and any board using the same pinout.

    By Trenz Electronic 86

  • TE0714 Series System on Module (SoM) with Xilinx A

    TE0714 series FPGA modules from Trenz integrate a Xilinx Artix-7, 16 MByte Flash memory for configuration, operation, and powerful switch-mode power supplies.

    By Trenz Electronic 53

  • TE0841 Series with Xilinx Kintex® UltraScale™

    Trenz Electronic's TE0841 series is designed for advanced driver assistance systems, broadcast cameras, motion control, and public/military mobile radios.

    By Trenz Electronic 66

  • TE0741 Series with Xilinx Kintex®-7

    Trenz Electronic's TE0741 integrates a Xilinx Kintex®-7 FPGA, eight multi-gigabit transceivers, 32 MB Flash memory, and powerful switch-mode power supplies.

    By Trenz Electronic 141

  • TE0712 Series with Xilinx Artix®-7

    Trenz Electronic’s TE0712 is an industrial-grade FPGA module integrating a Xilinx Artix®-7 FPGA for configuration and operation.

    By Trenz Electronic 68

  • TE0725 Series with Xilinx Artix®-7

    Trenz Electronic’s TE0725 are low-cost, small-sized FPGA modules integrating Xilinx Artix®-7 for configuration and operation.

    By Trenz Electronic 62

Top