Question about LM358 as a differential operational amplifier, We collect some more technical information about the LM358. hope this will be helpful for electronic engineer.
By Texas Instruments 277
Alpha Wire's Alpha Connect passive distribution boxes feature thermoplastic, die cast, or stainless steel housing options.
By Alpha Wire 246
AK Nord's XT-Nano-SXL high power embedded network module comes in a compact 22 mm x 34 mm package for space restricted applications.
By AK-NORD GmbH 181
AK Nord's XT-PICO-SXL high power embedded network module, with its compact 22 mm x 31 mm package, is suitable to be integrated even in very compact spaces.
By AK-NORD GmbH 201
HMS Networks' PCIe interfaces for easily connecting a PC to a CAN network through a PCIe or PCIe mini connection.
By HMS Networks 287
MIC2782 push button reset ICs from Microchip have an ANDOUT logic output and an operating supply voltage range of 1.5 V to 5.5 V.
By Microchip Technology 295
Lumberg Automation’s LioN-P µDCU can be used as a standard I/O module, a standalone DCU, or in a mixed DCU in combination with a higher-level PLC.
By Lumberg Automation 178
Texas Instruments' ISO1050 are galvanically isolated CAN transceivers that meets the requirements of the ISO11898-2 standard.
By Texas Instruments 455
The Arduino Ethernet shield allows an Arduino board to connect to the internet, and it is based on the Wiznet W5100 Ethernet chip.
By Arduino 547
ADI's isolated CAN transceivers, including ADM3052, ADM3053, and ADM3054, comply with the ISO 11898 standard and employ ADI's iCoupler technology.
By Analog Devices Inc 390
Exar Corporation presents the XRA120x I²C/SMBus GPIO expander and XRA140x SPI GPIO expander product families - a total of 12 device offerings.
By MaxLinear 487
Innovasic's FIDO incorporates the universal I/O controller that is configurable to support various communication protocols across multiple platforms.
By Innovasic Semiconductor 379
SY898535L 3.3 V, low skew fanout buffers from Microchip have an industrial temperature operating range of –40°C to +85°C and are available in 20-pin TSSOP package.
By Microchip Technology 440
Dedicated for 1.8 V / 3.0 V / 5.0 V smart card reader / writer applications the NCN8025A is a compact and cost effective interface IC solution.
By ON Semiconductor 474
HEATEVM evaluation module allows users to develop applications that will operate in high-temperature environment, risk-free.
By Texas Instruments 427
TI's SuperSpeed USB 3.0 products offer dual simplex data transmission rates of 5 Gbps, which are 10x faster than USB 2.0 products.
By Texas Instruments 400
TXS0102 are bidirectional voltage-level translators but also serve as a way to establish digital switching compatibility between mixed-voltage systems.
By Texas Instruments 367
Toshiba's optocouplers feature a quad configuration, wider creepage distance, and good performance at high temperatures.
By Toshiba Semiconductor and Storage 365
TT Electronics' high voltage optoisolator used in applications located in harsh environments needing a reliable seal against dust, liquids, and explosions.
By TT Electronics/Optek Technology 342
Vishay's CNY6xST is a series of optocouplers with phototransistor output and very high isolation voltage.
By Vishay Semiconductor / Opto Division 424