Semtech's SX9510 touch sensor controller includes 8-channels of LED drivers, a buzzer, IR detector and analog outputs designed ideally for TV applications.
By Semtech 368
Semtech's SX9300 is the world’s first dual-channel capacitive Specific Absorption Rate (SAR) controller.
By Semtech 384
Semtech's SX8633 is an ultra low power, fully integrated 12-channel solution for capacitive touch-buttons, and proximity detection applications.
By Semtech 454
EcoSpeed DC-DC converters help designers meet today’s demanding "green" power requirements .
By Semtech 350
Semtech's TS30013 are 3A DC/DC synchronous switching regulator with fully integrated power switches, internal compensation, and full fault protection.
By Semtech 166
Semtech’s TS51111 includes a high efficiency synchronous rectifier to convert the input AC power signal to a DC output level for battery charging. The device supports both direct battery charging
By Semtech 386
Semtech's TS80002 is a power transmitter communications and control unit for wireless charging applications.
By Semtech 367
Semtech’s GS12070 is a highly configurable UHD-SDI gearbox with four inputs and four outputs which supports conversions between multi-link, dual-link, and single-link UHD-SDI interfaces.
By Semtech 422
Semtech’s TS13401 is a galvanically isolated, 60 V power FET driver with bi-directional blocking.
By Semtech 319
Semtech’s SC431MSKQTRT adjustable shunt regulator offers a wide operating current range 130 µA to 150 mA.
By Semtech 383
SX1272 features LoRa from Semtech which provides ultra-long-range spread spectrum communication.
By Semtech 1018
Long transceiver LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques.
By Semtech 415
Semtech's SX1261 and SX1262 devices are designed for long-range wireless applications and support long battery life.
By Semtech 390
Semtech's RailClamp®0554S is designed to protect sensitive components connected to ESD, EFT and lightning.
By Semtech 418
Semtech’s RClamp®1255P provides dedicated surge and ESD protection for µUSB ports. It is designed to replace multiple discrete components in portable applications.
By Semtech 518
Semtech’s RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines.
By Semtech 452
Semtech's RClamp®0512TQ TVS diode offers a working voltage of 5 V with a low capacitance of 3 pF.
By Semtech 425
Semtech's LinkCharge is a complete, self-contained infrastructure wireless charging system that can be mounted underneath almost any non-metallic surface.
By Semtech 372
Semtech offers state of the art transient voltage suppression (TVS) protection solutions to help protect USB 3.0 ICs from dangerous fast rise-time transient threats while also presenting sufficien
By Semtech 473
Semtech’s RCLAMP0504FBTCT is a RClamp® TVS diodes that is designed to protect sensitive electronics from damage and latch-up due to a transient surge event.
By Semtech 458