.png)
Industrial robots are defined according to ISO 8373 [1]. It is a multi-joint manipulator or multi-degree-of-freedom robot for the industrial field.
By Panasonic 152
The Internet of Things is an information carrier that allows all ordinary physical objects that can be independently addressed to form an interconnected network.
By Panasonic 191
The more commonly used method in the sensor detection circuit is to take corresponding measures for the interference path and the receiving circuit to eliminate or weaken the noise interference.
By Panasonic 99
Texas Instruments, is a semiconductor multinational company in Texas, USA. It is famous for developing, manufacturing, and selling semiconductor and computer technology.
By Panasonic 169
IMU is an inertial sensor that has emerged with the continuous development of sensor technology and microelectronics technology. It belongs to a type of MEMS and is a highly integrated technology.
By Panasonic 142
Proximity sensor is a general term for sensors that replace contact detection methods such as limit switches and are designed to detect without touching the detection object.
By Panasonic 283
The conductivity sensor is a sensor used to measure the conductivity of various solutions or the total ion concentration of water samples in laboratories, industrial production, and detection fields.
By Panasonic 251
Smart sensors are equipped with microprocessors, which have the ability to collect, process and exchange information, and are the product of the combination of sensor integration and microprocessors.
By Panasonic 95
Although water is an essential resource, measuring its level accurately and reliably can be a real challenge, especially in fields such as agriculture, oceanography and engineering.
By 3M 87
Fluke’s 77x milliamp process clamp meters save time by not breaking the loop on 4 mA to 20 mA signal measurements.
By Fluke Electronics 65
The OPB350/OCB350 series from TT Electronics is easy to use requiring only an optical device and power supply.
By TT Electronics/Optek Technology 170
Omron's 2SMPP MEMS Gauge Pressure Sensor is ultra miniature in size (6.1x4.7x8.2 mm) and offers low power consumption of 0.2 mW.
By Omron Electronics Inc-EMC Div 202
Motion Sensors 3 mm diameter flat surface lens is possible using Panasonic’s unique Lens Formation Technology for silicon substrates, making the lens operating substantially small compared to othe
By Panasonic 222
Interlink's FSR™ 400 series is part of the single zone Force Sensing Resistor™ family.
By Interlink Electronics 172
Luna Optoelectronics' avalanche photodiodes and modules offer high internal gain and improved S/N ratios.
By Advanced Photonix 169
Luna Optoelectronics' low-cost cadmium sulfoselenide sensors for visible light measurement are designed to sense light from 400-700 nm.
By Advanced Photonix 160
Allegro's A1324/5/6 Hall effect linears are ratiometric sensors that provide a voltage output proportional to the applied magnetic field.
By Allegro MicroSystems, LLC 248
Allegro's A119x series of user-programmable, two-wire, unipolar, Hall effect switches offer improved high voltage transient protection.
By Allegro MicroSystems, LLC 159
Allegro's A115x two-wire, unipolar, Hall-effect switches are factory-trimmed to optimize the accuracy of magnetic switch points.
By Allegro MicroSystems, LLC 136
Allegro's ACS759 series is optimized for 3.3 V operation and provides economical and precise solutions for AC or DC current sensing.
By Allegro MicroSystems, LLC 191