With its ultra-miniature size and versatility, C&K's pushbutton switches are ideal for use in telecom and datacom applications.
By C&K 1209
C&K's TDP series is one of the first available ultra-miniature, surface-mount, half-pitch, side-actuated DIP switches.
By C&K 1197
C&K's HDT series of detect switches features low-profile packaging and a low actuation force of 35 grams (maximum).
By C&K 1149
C&K's KMT series switches feature a small footprint with an integrated actuator (push plate) and a 50% longer operational life as compared to similar products.
By C&K 1151
Storm Interface's 'out-of-the-box' encoders provide a simple and cost saving system interface that is able to address more than just numeric data entry.
By Storm Interface 1545
APEM's TS series thumbstick features non-contacting Hall effect technology and multiple linear output options including single- and dual-outputs.
By APEM Inc. 1695
The EL series of AC and DC output SSRs from Crydom feature output termination via 0.25" quick connect terminal and 0.187" quick connect input terminals.
By Sensata Technologies – Crydom 1582
Designed to disconnect 12 or 24 volt battery systems from their loads when the battery voltage falls below a pre-selected DC voltage
By Sensata Technologies – Crydom 1603
Features an LED input status indicator and zero-crossing (resistive loads) or random-fire (inductive loads) output.
By Sensata Technologies – Crydom 1495
Designed for harsh environments and available with either AC or DC input control voltages
By Sensata Technologies – Crydom 1779
Allows for attachment to an external heat sink to achieve full output ratings in a 40°C ambient temperature
By Sensata Technologies – Crydom 1388
These DC power relays enable DC load interruption at a high voltage and high current, which allows downsizing and non-polarization in the main contact circuit.
By Omron Electronics Inc-EMC Div 868
Standex Meder Electronics' reed switches are available in several sizes, are used in many industries, and have properties that allow it to operate in harsh environments.
By Standex-Meder Electronics 1728
Fully sealed to withstand insertion shock, wave solder temperatures, and board washing, the 210 Series Switches from CTS are economical AUTO-DIP Switches for use in numerous industrial and consume
By CTS Electronic Components 2148
The SN series T-Bar fader controller from APEM features precision ball-bearing and PTFE guides, 12-bit resolutions, and analog voltage or PWM output options.
By APEM Inc. 1642
Schurter's metal pushbutton switches with latching action are vandal-proof with raised actuators.
By SCHURTER Inc. 1209
The AQY2xx series from Panasonic features low CxR and improved on-resistance within three progressively smaller packages.
By Panasonic 1111
With an ergonomic, panel-mount design, the R7 Series of rocker switches offers solder, screw, or fast-on termination options.
By E-Switch 1630
Nidec Copal Electronics' CJS and CAS series are jumper switches specifically designed for replacement of jumper pins or for function setting switches on the PCB.
By Nidec Copal Electronics 958
C&K's JSX series features extended electrical and mechanical life for digital consumer electronic applications.
By C&K 1322