NXP's PN7462 family is based on the first single-chip, dual-interface reader IC. Equipped with a low-power ARM Cortex-M0 microcontroller core with USB, the family supports contact and contactl
By NXP Semiconductors 1475
The Synapse Wireless EK2100-220 evaluation kit is an easy-to-use introduction to the power of the Synapse network application platform (SNAP).
By Synapse Wireless 1138
Linear Technology’s LTC5586 is a direct conversion quadrature demodulator optimized for high linearity zero-IF and low-IF receiver application.
By Analog Devices Inc 785
Texas Instruments' LAUNCHXL-CC2650, SimpleLink™, MCU LaunchPad™ development kit can be connected to the cloud using Bluetooth Smart on a smartphone.
By Texas Instruments 746
TI’s CC1350, SimpleLink™, wireless MCU contains an ARM® Cortex®-M3 (CM3) 32-bit CPU, which runs the application and the higher layers of the protocol stack.
By Texas Instruments 808
Digi International's ConnectCore for i.MX6UL starter kit provides IoT connectivity with Ethernet and Bluetooth.
By Digi International 799
Laird offers its RM186/191 series of wireless modules that are a LoRA® and Bluetooth® Smart v4.1 integrated solution for LPWAN EIoT applications.
By Laird - Embedded Wireless Solutions 938
The Cypress BCM9WICED_SENSE2 provides the best out-of-box development experience for WICED® SMART.
By Cypress Semiconductor Corp 821
Murata's wireless development kit is designed to work with NXP iMX6 platforms. The kit consists of Murata EVB of type specified below.
By Murata Electronics 1598
The Bluetooth® low energy Pioneer Kit from Cypress Semiconductor enables customers to evaluate and develop Bluetooth 4.2 compliant solutions using the PSoC® 4 BLE and PRoC™ (programmable
By Cypress Semiconductor Corp 1788
Skyworks Solution Incorporated introduces their SKY13588-460LF CMOS silicon-on-insulator SP3T switch made for antenna selection in Wi-Fi applications in IoT systems.
By Skyworks Solutions Inc 1196
Microchip introduces their Amazon Web Service's (AWS) zero touch secure development platform which is a development kit for AWS IoT applications that use ECC508A to establish a secure connecti
By Microchip Technology 672
Skyworks Solutions Incorporated introduces their SKY13587-378LF pHEMT GaAs FET I/C switch that can be used in transmit/receive applications.
By Skyworks Solutions Inc 1259
Johanson Technology’s miniature RF ceramic chip antennas are made using low temperature cofired ceramic (LTCC) technology which has the ability to embed low- and high-dielectric constants inside t
By Johanson Technology Inc 2178
The Cypress BCM943364WCD1_EVB kit includes a BCM43364 SIP module seated on a full-featured, USB-based development and evaluation board that is fully compatible with the Cypress WICED Wi-Fi softwar
By Cypress Semiconductor Corp 676
The Cypress CYBLE-214009-00 is a fully certified and qualified module supporting BLE (Bluetooth® Low Energy) wireless communication.
By Cypress Semiconductor Corp 863
Johanson Technology’s zero-clearance metal-mounted antenna is designed for small coin cell, IoT, 2.4 BLE, wearable, ISM, Zigbee, and 802.11 applications in close-range networks.
By Johanson Technology Inc 2108
Cypress Semiconductor's CYBLE-222014-01 module is provided as a turnkey solution, including all necessary hardware required to use BLE communication standards.
By Cypress Semiconductor Corp 1239
NXP's Kinetis KW41Z / KW31Z / KW21Z wireless MCUs are designed for applications that include access control, fitness monitoring, asset tracking, and metering.
By NXP Semiconductors 824
The pSemi PE41901 is a passive, double-balanced, Ku band image reject mixer with high dynamic range performance and high LO isolation capable of operation up to 19 GHz.
By pSemi 1139