ROHM's BM60212FV-C is high and low side drive IC which operates up to 1200 V with bootstrap operation and can drive N-channel power MOSFET and IGBT.
By ROHM Semiconductor 1456
Maxim’s battery fuel gauges can predict how much longer, under specific operating conditions, the battery can continue to provide power.
By Maxim Integrated 1197
Microchip’s DV330101 LVPFC development kit offers safe voltage levels at moderate power while designing algorithms on a boost power factor correction topology.
By Microchip Technology 987
STMicroelectronics' B-G431B-ESC1 discovery kit with the STM32G431CB MCU is ideal for motor driving applications such as electric vehicles and boats.
By STMicroelectronics 847
MPS’ MP26xx chargers use input power from either an AC adapter or a USB port to supply the system load and charge the battery independently.
By Monolithic Power Systems 737
STMicroelectronics' STLINK-V3MINI debugger/programmer supports JTAG/SWD interfaces to communicate with the STM32 MCUs located on an application board.
By STMicroelectronics 1958
Boréas Technologies’ BOS1901 piezo haptic driver can drive actuators with up to 190 Vpk-pk waveforms while operating from a 3 V to 5.5 V supply voltage.
By Boréas Technologies 1104
Vishay's 60 V TrenchFET® Gen IV n-channel power MOSFET is optimized for standard gate drives.
By Vishay/Siliconix 1552
ISSI's DDR4 DRAM provides low power, high bandwidth, high performance, and high reliability needed for networking, automotive, and industrial systems.
By ISSI, Integrated Silicon Solution Inc. 1148
STMicroelectronics’ STDRIVE601 is a single-chip with three half-bridge gate drivers for N-channel power MOSFETs or IGBTs suitable for 3-phase applications.
By STMicroelectronics 881
NXP's TFA9894D is a high efficiency 10 V boosted Class-D audio amplifier with a sophisticated SpeakerBoost and protection algorithm.
By NXP Semiconductors 1382
Allegro's A5947 3-phase sensorless fan driver IC is ideal for a variety of industrial and automotive fan applications such as battery-cooling fans.
By Allegro MicroSystems, LLC 1151
Digilent’s ZedBoard™ Zynq®-7000 Arm®/FPGA is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC).
By Digilent, Inc. 802
Microchip’s ZL4029x high-performance ultra-low jitter low-power 20-output buffers meet BD2000Q/QL standards and support clock frequencies from 0 MHz to 250 MHz.
By Microchip Technology 1123
Silicon Labs' EFM8BB1 low-cost kit with integrated debugger and USB connection is an easy to use yet powerful evaluation tool and development starting point.
By Silicon Labs 1661
ON Semiconductor's FUSB340 is suited for the mobile device market and for use in Type-C applications where a reversible cable requires a switch.
By ON Semiconductor 995
ON Semiconductor's FUSB251 is a controlled overvoltage protection switch on CC and SBU pins in a Type-C™ interface port.
By ON Semiconductor 892
STMicroelectronics’ ADC is a low-power, eight-channel pure CMOS 12-bit analog-to-digital converter.
By STMicroelectronics 1939
EPC's EPC2111 eGaN® half-bridge enables 12 V to 1.8 V system efficiency over 85% at 5 MHz at 14 A output reducing costs to end user’s power conversion systems.
By EPC 700
Renesas’ RX231 MCU provides an interface for the BLE module, touch sensing, LCD control, and USB communication, all-in-one package.
By Renesas Electronics America 1092