TDK's TFM201610GHM series power inductors are miniature, low-profile, thin-film, metal, magnetic inductors for power circuits featuring up to twice the rated.
By TDK Corporation 728
Syfer StackiCap™ surface-mount MLCs are designed to provide high CV in compact packages and offer the greatest volumetric efficiency.
By Syfer 1977
The Syfer range of feedthrough MLCC chip ‘C’ filters are 3 terminal chip devices designed to offer reduced inductance.
By Syfer 1885
Syfer's FlexiCap™ is applied to the device under the standard nickel barrier finish to accommodate a greater degree of board bending than conventional capacitors.
By Syfer 2066
Syfer’s safety certified capacitors comply with international UL and TÜV specifications to offer designers the option of using a surface mount ceramic multilayer capacitor.
By Syfer 2086
Nichicon’s UHW series is a radial-leaded aluminum electrolytic capacitor featuring a small footprint, long life, and low impedance.
By Nichicon 1240
KEMET’s C4AE capacitors support a DC network by supplying periodically high currents with rated voltages starting at 300 VDC up to 1300 VDC up to 105°C.
By KEMET 1320
Bourns offers their two common-mode chip inductors and the four additional SMD power inductor series designed to meet the high-quality standard for automotive applications.
By Bourns Inc. 1026
Bourns' model CRS series has been designed with a specialized thick-film element to withstand high-powered surges with higher power ratings of up to 2 W.
By Bourns Inc. 912
TDK Corporation's humidity-resistant, X2 EMI capacitors offer capacitor types with rated capacitances ranging from 0.1 µF to 15 µF and lead spacings from 15 mm to 37.5 mm.
By EPCOS 1137
TDK has developed the ACT45R type common mode filter for FlexRay systems.
By TDK Corporation 918
TDK’s MMZ-E series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
By TDK Corporation 727
TDK’s MMZ series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
By TDK Corporation 699
TDK’s MPZ series ferrite chip beads are used to suppress noise in both signal and power supply circuits.
By TDK Corporation 702
Kemet's automotive grade, high voltage, high temperature surface-mount MLCCs meet the demanding AEC-Q200 qualification requirements.
By KEMET 1405
The MSR series from Riedon uses a bare metal element in an all-welded construction for through-hole circuit board mounting to provide resistance values from 5 mΩ to 100 mΩ.
By Riedon 1176
Riedon’s HTE series uses thick film technology in a non-inductive cylindrical construction for through-hole mounting.
By Riedon 1094
Murata’s two series of supercapacitors (EDLCs), which are the DMT series and the DMF series, feature the lowest levels of ESR throughout the industry.
By Murata Electronics 1538
Nichicon’s UCV series is a small sized low impedance surface mount aluminum electrolytic capacitor.
By Nichicon 1190
TDK's FG series is a high reliability consumer/automotive grade, halogen-free ceramic capacitors with dipped radial leads.
By TDK Corporation 718